RAM Strap Fascetta Portagomma Base Sferica 1.5″ – 2.1″ Ram Mounts RAM-B-108BU-HUM1
28,11 € Iva Inclusa
RM1646
2 disponibili (ordinabile)
Il RAM-B-108BU-HUM1 è costituito da una sfera di gomma di 1″ (pari a 2,54cm) di diametro collegata ad angolo retto a una base a forma di V. Il RAM-B-108BU-HUM1 ospita binari da 1,5″ (pari a 3,81cm) a un massimo di 2,1″ (pari a 2,54cm) di diametro. Per montare la base RAM-B-108BU-HUM1, posizionare la piastra a forma di sella sul binario, quindi avvolgere il metallo clamp cinghia attorno al binario e alla piastra. Serrare la manopola a vite sulla cinghia metallica con un cacciavite fino a quando la cinghia non ha una presa salda sulla guida. Il RAM-B-108BU-HUM1 è una base di montaggio alternativa per aeroplani Beechcraft con un lancio sopra il yoke.
DESCRIZIONE IN INGLESE:
The RAM-B-108BU-HUM1 consists of a 1″ diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU-HUM1 accommodates rails from 1.5″ to a maximum of 2.1″ in diameter. To mount the RAM-B-108BU-HUM1 base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap con a screwdriver until the strap has a firm hold on the rail. The RAM-B-108BU-HUM1 is an alternative mounting base for Beechcraft airplanes con a throw over yoke.
The RAM-B-108BU-HUM1 consists of a 1″ diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU-HUM1 accommodates rails from 1.5″ to a maximum of 2.1″ in diameter. To mount the RAM-B-108BU-HUM1 base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap con a screwdriver until the strap has a firm hold on the rail. The RAM-B-108BU-HUM1 is an alternative mounting base for Beechcraft airplanes con a throw over yoke.
CODICE PRODOTTO: RAM-B-108BU-HUM1
TIPO PRODOTTO: Componente
SPECIFICHE PRODOTTO
– Product Weight: 0.26 lb
– Hardware Included: (1) #28 Worm Drive Strap Clamp|(1) 6″ Rubber Strip
– Clamp Range: 1.5″ – 2.1″ diameter
– Ball Size: B Size (1″)
– Weight Capacity: Standard Use: 2 lbs|Heavy-Duty Use: 1 lb
– Materials: Marine-grade aluminum
– Packaging Type: Poly Bag
– Product Weight: 0.26 lb
– Hardware Included: (1) #28 Worm Drive Strap Clamp|(1) 6″ Rubber Strip
– Clamp Range: 1.5″ – 2.1″ diameter
– Ball Size: B Size (1″)
– Weight Capacity: Standard Use: 2 lbs|Heavy-Duty Use: 1 lb
– Materials: Marine-grade aluminum
– Packaging Type: Poly Bag
